Baroness LM56GC, Owner'S Operating Manual

Page: 37 / 88

1 Link rod
2 Snap pin
3 Washer
4 Flat head pin
5 L-shape bracket
6 Nut A
7 Nut B
Repeat the same process for adjustment of
the opposite link rod.
Adjustment of gap for the grass catcher:
Important
Adjust so that the grass catcher will not
overlap with the stay.
Important
Adjust so that the small gap between the
grass catcher and the stay will be even.
1
A
2
gp7sf7-003
Adjustment of IGCA (Independent Grass Catcher Arm)_003
1 Grass catcher
2 Stay
A Gap
Loosen the right and left locknuts.
Remove the right and left clip pin.
Important
The shaft has a through-hole into which the
clip pin will be inserted.
To adjust length always turn the shaft 180
degrees to keep holes aligned.
Turn the right and left shafts to adjust so that
the gap between the grass catcher and the
stay will be 1.0 mm (0.039 in).
6.
1.
2.
3.
Tighten the right and left locknuts.
2
3
1
gp7sf7-004
Adjustment of IGCA (Independent Grass Catcher Arm)_004
1 Locknut
2 Clip pin
3 Shaft
Adjustment of Blade Engagement
Caution
When handling the reel cutter (cutting
cylinder) or bed knife (bottom blade), wear
gloves to protect your hands.
Pay attention not to let the reel cutter (cutting
cylinder) catch your gloves. Otherwise, you
may injure your hand or fingers.
Stop the engine.
Set the traveling/working selector lever to the
"Travel OFF" position.
A
B
C
1
vjbj2l-001
Adjustment of Blade Engagement_001
1 Traveling/Working selector lever
A Reel ON
B Travel ON
C Travel OFF
4.
1.
2.
Handling Instructions
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-13
Adjustment before Work