Baroness LM56GC, Owner'S Operating Manual

Page: 36 / 88

Adjustment before Work
Adjustment of Handle
The height of the handle can be adjusted
according to the operator's working position.
Move the handle adjusters supporting the
handle up or down and fix them with the bolts.
A
B
1
2
3
75uxaw-011
Adjustment of Handle_001
1 Bolt
2 Conical spring washer
3 Washer
A High
B Low
Adjustment of IGCA (Independent Grass
Catcher Arm)
Note:
Depending on the specifications, this function
may not be available.
Important
When adjusting the height of handle, adjust
IGCA.
Remove the traveling tires.
Flip up the stand.
Install the grass catcher.
Adjustment of the link rod:
Important
Adjust the handle pipe so that it can locate at
the center of the handle guide.
1.
2.
3.
1
2
gp7sf7-001
Adjustment of IGCA (Independent Grass Catcher Arm)_001
1 Handle pipe
2 Handle guide
Important
Adjust the right and left link rods so that they
will be as long as each other.
Remove the snap pin and washer and then
remove the flat head pin.
Loosen the nut A and turn the L-shape
bracket to adjust the length of the link rod.
When raising the handle, shorten the link
rod.
When lowering the handle, lengthen the link
rod.
Attach the flat head pin, washer and snap
pin to the forefront of slotted hole of the L-
shape bracket.
Make sure that the handle pipe locates at the
center of the handle guide.
Tighten the nut A.
7
1
5
4
2,3
6
gp7sf7-002
Adjustment of IGCA (Independent Grass Catcher Arm)_002
1.
2.
3.
4.
5.
LM56GC
・
LM66GC / LM66TC
Handling Instructions
Page 4-12
Adjustment before Work