Barko HARVESTER 240B, Operator'S Manual, Page: 9 / 174

10-5
®
INTRODUCTION
Model and Serial Numbers are found on the Data Plate of your machine and/or
attachment. Machines and Attachments each have their own unique S/N's. Locations of the
612/830/930/937 LH rear of front frame
Your BARKO machine has been designed and manufactured with the highest quality of
materials and care in workmanship. This Operator’s Manual is intended to assist you in safe
operation and maintaining your BARKO to keep it in peak condition. A BARKO Operator’s Manual must
be with the machine at all times. Separate Parts and Service Manuals can be obtained from your
BARKO Dealer.
Understand the correct servicing procedures before servicing your BARKO machine or
attachment. It is important to know the correct operating and servicing procedures of the machine and
all safety precautions to prevent the possibility of property damage and/or personal injury or death.
REFER TO A BARKO SERVICE MANUAL for detailed service schedules and procedures.
PHONE: 715-395-6700
EMAIL: Parts@barko.com
Right or left hand is determined when positioned in the machine from the normal
Cylinders- The port location off center viewed from butt of cylinder.
Pump and Motor Rotation-
Determined by viewing from the shaft end.
1. Right Hand (RH) or Left Hand (LH)
Know the following information before ordering parts or servicing your BARKO machine:
All parts for your BARKO machine or attachment may be ordered from your nearest BARKO
Dealer. If you are not certain of the dealer's location check our website or contact BARKO Customer
Service for assistance:
operator's seat position behind the boom or lifting arms.
WEB: www.barko.com/dealer-locator
2. Model and Serial Numbers ---- IMPORTANT!
data plate on popular BARKO models are:
70/80/110 LH or RH head plate
240/260/270
On head right side of main lift cylinder
295/495/595 RH on lower frame below platform
service procedures in this manual before servicing your BARKO machine or attachment.
It is your responsibility to know and understand ALL safety warnings and follow safe
Cylinders- ID numbers stamped on gland.
may be machine/serial number specific.
machine or attachment. BARKO warranties are included with the Operators manual and
It is your responsibility to know and understand the factory warranty for your BARKO
4. Safe Working Practices & Procedures
Grapples- Front or side head plate
3. Warranty
PART NO 539-00667
06/03/2019
Updated
OPERATOR’S