Barko HARVESTER 240B, Operator'S Manual, Page: 88 / 174

40-6
®
HARVESTER SIDE CONSOLE
(continued...)
FAN SPEED
(9) THROTTLE
FAST
SKYLIGHT
AIR KNIFE OR
ACCESSORY (SPARE)
(10) AUTO / MANUAL
THROTTLE
(13) CRAWLER
REVERSE
HORN
(15) CREEP MODE
(7) HEATER-A/C
SELECTOR
TEMPERATURE
CONTROL
(8) THROTTLE
SLOW
FRONT WINDOW
AIR KNIFE OR
ACCESSORY (SPARE)
(11) HI / LOW
TRACK SPEED
(12) VACUUM PUMP
(IF EQUIPPED)
(14) ENGINE FAN
REVERSE
ACCESSORY
(SPARE)
IGNITION
SWITCH
BOOM LIGHTS
SIDE & REAR
LIGHTS
FORWARD PLATFORM
& CAB LIGHTS
Fig-2
12V POWER
(x2)
Fig-2 illustrates the typical layout and locations of the Heater-A/C Control, Key Pad and Light
Switches on a BARKO Harvester.
HEAD ARMING SWITCH- Activates the functions of the cutting attachment. It is intended to be an
additional safety feature. No functions of head will work until this switch is activated.
SEAT HEATER SWITCH- 3-position (HI-OFF-LOW) switch controls the heated seat if equipped.
RADIO / STEREO-
See RADIO / STEREO Section later in this chapter for further instructions.
HEATER-A/C SELECTOR SWITCH- 3-position (HEATER / DEFROST - OFF - A/C) switch controls the
HVAC system.
Ÿ
In order to activate the Head Enable Switch, the Control Power (System Enable) switch must first
be activated.
MD4 DISPLAY MONITOR- See MD4 DISPLAY MONITOR Section later in this chapter for further
instructions.
4.
6.
3.
5.
7.
ACC ACC
A/M
R
ACC
HI /
LOW
VAC
PUMP
08/20/2018
Updated
OPERATOR’S