Bard MEGA-TEC W090A, Service Instructions Manual

Page: 98 / 159

Manual 2100-705B
Page 36 of 43
To enable/disable
Zone 2 Indoor Humidity
:
1) Press MENU key to go to the Main Menu
screen.
2) Press UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config ;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z2 Indoor
Hum C5 .
5) Press ENTER key to scroll to Enable (see
Figure 37).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
To enable/disable Zone 1 Indoor Temperature :
1) Press MENU key to go to the Main Menu
screen.
2) Use UP or DOWN keys and ENTER key to enter
USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config ;
press ENTER key.
4) Press UP or DOWN keys to scroll to
Z1 Indoor
Temp C7 .
5) Press ENTER key to scroll to
Enable
(see
Figure 39).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
5) Press ENTER key to scroll to
Enable
(see
Figure 38).
6) Press UP or DOWN key to change value to ON
to enable sensor (or change value to OFF to
disable sensor).
FIGURE 37
Enable/Disable Zone 2 Indoor Humidity Sensor
FIGURE 38
Enable/Disable Zone 3 Indoor Humidity Sensor
FIGURE 39
Enable/Disable Zone 1 Indoor Temperature Sensor
To enable/disable Zone 1 Remote Temperature :
1) Press MENU key to go to the Main Menu
screen.
FIGURE 36
Enable/Disable Zone 1 Indoor Humidity Sensor
To enable/disable Zone 3 Indoor Humidity :
1) Press MENU key to go to the Main Menu
screen.
2) Press UP or DOWN keys and ENTER key to
enter USER password 2000.
3) Press UP or DOWN keys to scroll to IO Config ;
press ENTER key.
4) Press UP or DOWN keys to scroll to Z3 Indoor
Hum C6 .