Bard FUSION-TEC WR Series, Literature Assembly

Page: 41 / 102

Manual 2100-704C
Page 39 of 47
The Run Test Summary screen (Figure 39) contains a
readout of the test that is currently taking place, and
the Task the technician should be completing to verify
operation.
The
Motors & Sensors screen (Figure 40) displays
output and estimated positional values for unit motors
and actuators, and also temperature and humidity
sensor values.
The
A/C Circuit screen (Figure 41) displays all unit
inputs, outputs and calculations associated with the
A/C circuit operation.
FIGURE 38
Executing Run Test
FIGURE 39
Run Test Summary
FIGURE 40
Run Test: Motors & Sensors
FIGURE 41
Run Test: A/C Circuit
Run Test Parameter Description
Econ Stage Time: Amount of time (in seconds) allowed
for damper blade movement in each direction.
Cool Stage Time: Amount of time (in seconds) allowed
for each stage of cooling.
Heat Stage Time: Amount of time (in seconds) allowed
for heating stage.
3. Clear Unit Alarm Logs on Each Unit
Units may have alarms logged due to testing. Unit
alarm logs must be cleared at time of installation.
To clear the wall-mount unit alarm logs:
1) Press MENU key to go to the Main Menu
screen.
2) Use UP or DOWN keys and ENTER key to
enter TECHNICIAN password 1313.
3) Press UP or DOWN keys to scroll to Settings ;
press ENTER key.
4) Press UP or DOWN keys to scroll to
Initialization ; press ENTER key.
5) Press ENTER key to scroll to Clear alarm logs?
(see Figure 42).
FIGURE 42
Clearing Unit Alarm Logs
6) Press UP or DOWN key to value to YES ; press
ENTER key.
7) Press ESCAPE key several times to return to
Main Menu screen.
pressing ENTER key to scroll to
Return to
Screens , pressing UP or DOWN key to change
value to YES and pressing ENTER key.