11. Electronics Unit
3
1
2
Image 11-17
Connecting the compressor wiring
1
Cable ID ’1’
2
Cable ID ’2’
3
Cable ID ’3’
Image 11-18
Warning:
Avoid damage to the compressor. Make sure the wires are correctly connected.
10.Install the screw (reference 1 image 11-19) and ground (GND) cable onto the compressor.
1
Image 11-19
Connecting the compressor GND cable
11.Reinstall the compressor wiring connection cover and nut.
12.In case of the presence of the thermal switch cable, proceed as follows:
-
If a thermal switch is present in the compressor, connect the two wires on the thermal switch contacts.
Image 11-20
74
R5906015 ULC-30A 01/02/2018
Summary of Contents for ULC-30A
