![background image](http://html1.mh-extra.com/html/barco/ulc-30a/ulc-30a_service-manual_3812456044.webp)
8. Primary pump unit
8.3
Removing the primary pump unit
C
AUTION
:
Perform this procedure via the service tool wizard only. Ensure all required steps have been per-
formed prior to pump removal. For more info, see "Primary pump replacement process", page 37.
Necessary tools
•
Flat screwdriver
•
Phillips screwdriver PH2
•
Nut spanner 5.5 mm
•
Nut spanner 8 mm
•
Cutting pliers (for cable ties)
This procedure assumes that power has been switched off. Unless otherwise stated, power must be off prior
to start with this procedure. To switch off power, see procedure "Switching off power and locking the switch",
page 15.
How to remove the primary pump unit?
1. Remove the cable ties (reference 1 image 8-6) that secure the insulation on the refrigeration unit quick couplers.
1
1
1
1
1
1
Image 8-6
Removing cable ties
2. Pry open and discard the insulation shells.
Image 8-7
Removing insulation shells
3. Disconnect the two open type quick couplers from the refrigeration Unit. Perform the steps shown below for both quick coupler
connections.
40
R5906015 ULC-30A 01/02/2018
Summary of Contents for ULC-30A
