Barco ULC-30A, Service Manual

Page: 11 / 102

2. General information
2. GENERAL INFORMATION
Overview
• Conventions
• General description
• Covers
• Service kit
• Chiller service tool
2.1 Conventions
Chiller orientation
In this manual the reference to locations (i.e. left, right, front, rear, top, bottom) is taken with respect to the front side, where the
Barco logo is situated.
TOP
BOTT
OM
LEFT
REAR
FRONT
RIGHT
TOP
BOTT
OM
LEFT
REAR
FRONT
RIGHT
Image 2-1
Chiller orientation
2.2 General description
Usage
The ULC-30A is designed and manufactured for the purpose of cooling the lasers and DMD of the laser projector. Cooling is estab-
lished by means of a liquid solution made of glycol and demineralized water.
A circulation pump forces the coolant to circulate inside a closed circuit where it acquires the heat generated by the equipment being
cooled. The radiator dissipates the heat acquired by the coolant by means of ambient temperature air generated by a fan.
The ULC-30A can be used either separately or coupled with another chiller of the same type. Two ULC-30A units are connected by
means of a serial connection.
The ULC-30A is controlled by the projector by means of a serial connection.
R5906015 ULC-30A 01/02/2018 7