![background image](http://html1.mh-extra.com/html/barco/touchkit/touchkit_installation-and-user-manual_3890441003.webp)
Chapter 1. Installing TouchKit
Barco TouchScreen Controller
3
Chapter 1. Installing TouchKit
TouchKit is software that contains drivers of the touch panel and
two other utilities.
The two utilities are:
•
TouchKit configuration utility
The calibration and draw test of the touch panel are done by this
utility. See
Chapter 2. Configuration Utility
on page
9.
•
Touch Tray (system tray application)
This is a utility for emulating the right and left button of the
mouse for controlling the touch panel. Users can toggle between
right or left mouse buttons using this utility. See
Chapter 3.
System Tray application
on page
27.
Follow these steps to install TouchKit.
1. Put the enclosed CD into the CD-ROM drive.
2. When Autoplay is enabled on the PC, the install menu opens
automatically.
When Autoplay is not enabled, open the CD-ROM window
and double-click Autorun.hta. As a consequence the install
menu opens.
3. Click
Install touch screen driver
to start installation.
Do not plug the USB controller in the system before the
installation has been finished. In case of a multi-monitor
system do not yet plug in any of the USB controllers.
The Welcome screen appears.