![background image](http://html1.mh-extra.com/html/barco/touchkit/touchkit_installation-and-user-manual_3890441010.webp)
Chapter 2. Configuration Utility
10
Barco TouchScreen Controller
General
The controllers are displayed in the Installed Touchscreen
Controllers box. Each controller corresponds to an MFCD 1219 TS
display connected to a USB port.
Selecting a controller in the panel list box activates the
corresponding touch panel.
USB controllers are listed automatically as soon they are plugged
in. The program will also remove the controllers automatically as
soon as they are unplugged.
Note
: After adding a controller, remember to calibrate the panel
first before using it.
You can also rename a USB controller. Therefore, click the current
controller name. Wait an instance and then click the name again.
Now you can edit the name.
The controller name is linked to the USB port. If you plug the USB
cable into another USB port, the name is automatically changed.