![background image](http://html1.mh-extra.com/html/barco/touchkit/touchkit_installation-and-user-manual_3890441017.webp)
Chapter 2. Configuration Utility
Barco TouchScreen Controller
17
Touch the blinking symbol on the screen until the computer
beeps or the symbol stops blinking.
After calibration, new calibration parameters are stored in the
display memory, overwriting the previous ones. The linearization
parameters however are not overwritten.
Important
:
•
Do not touch the touch screen until the main screen appears
again. Otherwise the new calibration parameters will not be
written to the display memory and the calibration will have
to be redone.
•
Be careful to touch the screen only on the blinking symbol. If
your finger or stylus touches the blinking symbol and the rest
of your hand touches the screen on a different area, the
calibration will not be accurate.
<Clear and Calibrate>
Press this button to clear the current linearization parameters and
start a 4-points calibration.