![background image](http://html1.mh-extra.com/html/barco/touchkit/touchkit_installation-and-user-manual_3890441025.webp)
Chapter 2. Configuration Utility
Barco TouchScreen Controller
25
<Edge Compensation Switch>
Users can Enable / Disable Edge compensation at the left bottom
corner of Touchkit Utility.
The +10% and -10% buttons will adjust the edge settings.
If you press the
+10%
button, the top, bottom, left and right
edges will extend by 10% and the Offset X and Y Axis settings
increase with 10 pixels.
If you press the
-10%
button, the top, bottom, left and right
edges will decrease by 10% and the Offset X and Y Axis settings
decrease with 10 pixels.
Click
Default
to restore the default settings.
Hardware
The Hardware tab page shows information of interface, type,
firmware version for the selected controller.