Chapter 1. Installing TouchKit
6
Barco TouchScreen Controller
8. If you are installing a multi-monitor system, check the option
Support multi-monitor system
. If not, do not check this
option.
Click
[Next >]
to continue. The Choose Destination Location
screen appears.
9. Select the appropriate folder where setup files will be
installed. Then press
[Next >]
to continue installation. The
Select Program Folder screen appears.
10. Enter the name of the program folder for TouchKit or press
[Next >]
to accept the default folder and continue.
11. During driver installation, the setup program will scan the
COM ports to install the RS232 Touchkit controller.
Windows copies files to the disk and the setup is complete.
