Chapter 2. Configuration Utility
14
Barco TouchScreen Controller
Option
Touchkit provides an option for advanced Mouse settings. When
the Option button is pressed, a setting property sheet will be
popped up.
[Enable Constant Touch]
Check the Enable Constant Touch option to force the driver to stop
reporting touch points when the movement is within the defined
range. Therefore, the user can see a stabilized cursor instead of a
chattering cursor when users touch the same point with
unwanted noise.
Use this option to optimize the response of the touch screen for
finger operation.
For stylus operation & drawing it is not recommended to use the
constant touch feature
Use the Constant Touch Area slider to adjust the size of the
constant touch area.
This option is switched off by default.
