![background image](http://html.mh-extra.com/html/barco/solaris-ld-120-8/solaris-ld-120-8_installation-and-service-manual_473806076.webp)
9. Servicing
Image 9-12
Remove the SMPS unit.
9.9 Replacing the fan of a Solaris LD tile
Barco supply a spare part kit containing an internal fan plus steel plate for the Solaris LD tile. Kit order no.
B5571981K. The fan has to be replace together with the steel plate.
Necessary tools
Torx TX20 screw driver.
How to replace the fan of a Solaris LD tile ?
1. Remove the resync-unit, the back cover and the SMPS unit of the tile. See the corresponding service procedures in this manual
for more detailed instructions.
2. Disconnect the wire unit of the fan from the power supply. (image 9-13)
3. Separate the power supply from the steel plate by releasing the four bolts in the corners of the power supply. Use a Torx TX20
screw driver. (image 9-14)
4. Attach the power supply upon a new steel plate with new fan. Fasten with four screws.
5. Connect the wire unit of the fan with the power supply. See detail of image 9-13. Ensure to guide the wire unit through the two
cable holders on the steel plate of the SMPS unit.
6. Reinstall the SMPS unit inside the tile.
7. Reinstall the back cover of the tile and the resync-unit.
72
R5976773 SOLARIS LD DISPLAY 02/12/2004
Summary of Contents for Solaris LD 120-8
