Barco SLM R12 Plus, Service Manual, Page: 71 / 281

11. Signal Input Selection R763850 & R763851
11. SIGNAL INPUT SELECTION R763850 & R763851
11.1 General Info
Introduction
The full input section comprises two 5-cable fixed BNC inputs and two digital slots to insert (optional) digital modules like the SDI /
H-SDI or another digital decoder. On the input selection module 1 & 2 there is also a DVI IN available and only on the input selection
module 1 a DVI OUT. A digital decoder R763826 is connected to each of the input boards. Video or S-video signals are processed
in this digital decoder board to re-enter this input board where they are buffered in order to add them to the digital RGB_ ANA.
View of the Signal Input modules
Input selection module 1 R763850
Input selection module 2 R763851
Input Backplane R763378
Image 11-1
Overview Signal Input modules
R5976820 SLM R12+ PERFORMER 08/03/2005 69