Barco SLM R12 Plus, Service Manual, Page: 51 / 281

8. Local Keypad & LCD Display
Info Display LCD Display Error Description
- L
ERROR(-2404)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x22: Mains voltage too low; must be
>180Vrms.
- L ERROR(-2424)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x22: Error in LPS power circuits.
- L ERROR(-24xx)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x22: Unknown LPS error.
- L ERROR(-2501)
START PFC NOT OK
LPS with I 2 C slave address 0x22: Start-up of the PFC module failed.
- L ERROR(-2502)
START LPS NOT OK
LPS with I 2 C slave address 0x22: Start-up of the LPS module failed.
- L ERROR(-2503)
START BOOST NOT OK
LPS with I 2 C slave address 0x22: Start-up of the BOOST module failed.
- L ERROR(-2506)
LAMP IGNITION FAILED
LPS with I 2 C slave address 0x22: Ignition of the lamp failed.
- L ERROR(-2507)
LAMP VOLTAGE OUT RANGE
LPS with I 2 C slave address 0x22: The voltage at the lamp is too high.
- L ERROR(-2508)
LAMP POWER OUT RANGE
LPS with I 2 C slave address 0x22: The power at the lamp is too high.
- L ERROR(-2509)
OVERTEMP IN LPS
LPS with I 2 C slave address 0x22: Temperature in LPS is too high.
- L
ERROR(-2510)
HTSNK OVERTEMP LPS
LPS with I
2
C slave address 0x22: Heatsink temperature in LPS is too
high.
- L
ERROR(-2511)
AMBIENT OVERTEMP LPS
LPS with I
2
C slave address 0x22: Ambient temperature in LPS is too
high.
- L ERROR(-2512)
FAN ERROR LPS
LPS with I 2 C slave address 0x22: Fan error.
- L ERROR(-2701)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Fuse F100 has blown up.
- L ERROR(-2704)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Mains voltage too low; must be
>180Vrms.
- L ERROR(-2723)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Error in LPS low voltage circuits.
- L ERROR(-2724)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Error in LPS power circuits.
- L ERROR(-2725)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Lamp has gone out and LPS still
running.
- L ERROR(-2726)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Lamp output short-circuited.
- L ERROR(-2727)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Output power out of range.
R5976820 SLM R12+ PERFORMER 08/03/2005 49