Barco SLM R12 Plus, Service Manual, Page: 52 / 281

8. Local Keypad & LCD Display
Info Display LCD Display Error Description
- L
ERROR(-2740)
LAMP POWER SUPPLY
LPS with I
2
C slave address 0x28: "Error mains" signal from SMPS
module has shut down the LPS module.
- L ERROR(-2750)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Over-temperature on heatsink mains
rectifier.
- L ERROR(-2751)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Over-temperature on heatsink PFC
and LPS primary.
- L ERROR(-2752)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Over-temperature in transformer LPS.
- L ERROR(-2753)
LAMP POWER SUPPLY
LPS with I 2 C slave address 0x28: Over-temperature on heatsink LPS
secondary diode.
- L ERROR(-2801)
START PFC NOT OK
LPS with I 2 C slave address 0x28: Start-up of the PFC module failed.
- L ERROR(-2802)
START LPS NOT OK
LPS with I 2 C slave address 0x28: Start-up of the LPS module failed.
- L ERROR(-2803)
START BOOST NOT OK
LPS with I 2 C slave address 0x28: Start-up of the BOOST module failed.
- L ERROR(-2806)
LAMP IGNITION FAILED
LPS with I 2 C slave address 0x28: Ignition of the lamp failed.
- L ERROR(-2807)
LAMP VOLTAGE OUT RANGE
LPS with I 2 C slave address 0x28: The voltage at the lamp is too high.
- L
ERROR(-2808)
LAMP POWER OUT RANGE
LPS with I
2
C slave address 0x28: The power at the lamp is too high.
- L
ERROR(-2809)
OVERTEMP IN LPS
LPS with I
2
C slave address 0x28: Temperature in LPS is too high.
- L ERROR(-2810)
HTSNK OVERTEMP LPS
LPS with I 2 C slave address 0x28: Heatsink temperature in LPS is too
high..
- L ERROR(-2811)
AMBIENT OVERTEMP LPS
LPS with I
2
C slave address 0x28: Ambient Temperature in LPS is too
high.
- L ERROR(-2812)
FAN ERROR LPS
LPS with I 2 C slave address 0x28 :Fan error
- P ERROR(-3001)
SMPS FAILED
The SMPS has unexpectedly shut down.
- P ERROR(-3002)
SMPS START FAILED
Unable to start the SMPS.
- P ERROR(-3003)
SMPS OUTPUT SHORTED
The output of the SMPS is shorted.
- P ERROR(-3004)
TOP FAN ERROR
The Fan on top of the lamp is not working.
- P ERROR(-3005)
ANODE FAN ERROR
The Fan at the anode of the lamp is not working.
50 R5976820 SLM R12+ PERFORMER 08/03/2005