Random Access Adjustment Mode
8-5
5975618A RETRO BLOCK GRAPHICS 2100LC 240898
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
CONFIRM
EDIT FILE
Save changes to file
xga.c30?
<ENTER> to confirm
<EXIT> to return
RENAME FILE
Filename
Src
Resolution
-----------------------------------------------------
ntsc.s01
1
675x240i
ntsc.c01
1
675x240i
ntsc_2.s01 1
675x240i
-----------------------------------------------------
Active file : ntsc.c50
Select with
ê
or
é
<ENTER> to accept
<EXIT> to return.
RENAME FILE
Frome file name :
ntsc.s01
To file name :
demo.c10
Select with
è
or
ç
Reprogram with
ê
or
é
or numeric keys
<ENTER> to confirm
<EXIT> to return
FILE SERVICE
LOAD
EDIT
RENAME
COPY
DELETE
COPY FILE
Filename
Src
Resolution
-----------------------------------------------------
ntsc.s01
1
675x240i
ntsc.c01
1
675x240i
ntsc_2.s01 1
675x240i
-----------------------------------------------------
COPY FILE
Frome file name :
xga_60.s03
To file name :
xga_60.c14
CONFIRM
COPY FILE
Replace file
"ntsc.c14"
with file
"xga_60.c14" ?
<ENTER> to confirm
<EXIT> to return
Frame Delay:
[on] or [off]
Normally there is a 1 frame delay between the source and the
reproduction of the image on the LCD panel.
[on]: default position, 1 frame delay between source and LCD panel
[on]: for minimum delay for simulation applications with specific
sources e.g. XGA on 60 Hz
Press
EXIT
to leave the Edit File Option menu.
A 'Confirm Edit File' menu will be displayed.
Press
ENTER
to confirm and to save the new settings or
EXIT
to return
without saving the new entered settings.
Rename File
To change the name of a selected file.
Use the control disk to select RENAME and press
ENTER
. The Rename
selection menu will be displayed. Use the control disk to select a file
name and press
ENTER
to select.
The Rename menu will be displayed with the selected file name
already filled in, in the 'From file name :' area and in the 'To file name:'
area.
The first character is highlighted. Push the control disk to the right or
to the left to select the desired character. Change that character by
pushing the control disk up or down. Numeric characters can be
entered directly with numeric keys on the RCU.
Press
ENTER
to confirm. The renamed file is entered in the list of files.
Press
EXIT
to return to the Rename menu selection. No changes are
made.
Copy File
To copy a selected file into a new file.
Use the control disk to select COPY and press
ENTER
. The Copy
selection menu will be displayed.
Use the control disk to select a file name and press
ENTER
to select.
The Copy menu will be displayed with the selected file name already
filled in, in the 'From file name :' area and in the 'To file name :' area.
The first character is highlighted. Push the control disk to the right or
to the left to select the desired character. Change that character by
pushing the control disk up or down. Numeric characters can be
entered directly with numeric keys on the RCU.
Press
ENTER
to confirm. The copied file is entered in the list of files.
Press
EXIT
to return to the Copy selection menu. No copies are made.
If the file extension already exists, a confirmation menu will be
displayed to ask the user to overwrite the extisting file by the new
file.