Controlling
6-2
5975618A RETRO BLOCK GRAPHICS 2100LC 280498
How to Display a Projector Address?
Press the
ADDRESS
key (recessed key on the RCU) with a pencil.
The projector's address will be displayed in a 'Text box'. This text box
disappears after a few seconds.
To continue using the RCU, it is necessary to enter the same address
with the digit buttons (address between 0 and 9). For example : if
the Address key displays projector address 003, then press "3" digit
button on the RCU to set the RCU's address to match the projector's
address. Do not press digit 003. This will address the remote to '0'
and control all projectors in the room.
How to Program an Address into the
RCU?
Press the
ADDRESS
key (recessed key on the RCU) with a pencil and
enter the address with the digit buttons. That address can be any
digit between 0 and 9.
Picture Controls with Direct Access.
When an image control is pressed, a text box with a bar scale, icon
and function name of the control, e.g. 'brightness...' appears on the
screen (only if text is ON). See example screen. The length of the
bar scale and the value of the numeric indication indicate the current
memory setting for this source. The bar scale changes as the + or
- buttons of the control on the RCU are pressed or the + or - buttons
on the local keypad.
Brightness Control
A correct
'brightness'
setting is important for good image reproduc-
tion.
Use the + button for a higher brightness.
Use the - button for a lower brightness.
Contrast Control
A correct 'contrast' setting is important for good image reproduction.
Adjust the contrast to the level you prefer, according to room lighting
conditions.
Use the + button for a higher contrast.
Use the - button for lower contrast.
Color Saturation
Color saturation is only active for Video and S-Video. Adjust the color
intensity of the picture.
Use the + button for richer colors.
Use the - button for lighter colors.
Tint Control
Tint is only active for Video and S-Video when using the NTSC 4.43
or NTSC 3.58 system.
Use the + button
Use the - button.
Sharpness Control.
Use the + button for a sharper picture.
Use the - button for a softer picture.
Phase Control
Use the Phase key to adjust the phase until stable representation of
fine picture details is reached.
BRIGHTNESS
0
255
PROJECTOR ADDRESS
001
