2-1
Installation Set Up
5975618A RETRO BLOCK GRAPHICS 2100LC 280498
2
)URQW7DEOH
)URQW&HLOLQJ
5HDU7DEOH
5HDU&HLOLQJ
INSTALLATION SET UP
To change the Configuration, enter the adjustment mode by pushing
ADJUST
or
ENTER
.
Highlight Installation by pushing the control disk forward or backward and press
ENTER
to select. The installation menu will be displayed.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Source 01
The actual selected configuration will be highlighted.
Push the control disk forward or backward to select the corresponding configuration
with regard to the projector environment. Press
ENTER
to confirm your selection.
ENTER
displays the Installation menu.
EXIT
returns to operational mode.
ENTER
to confirm the selection.
EXIT
returns to the installation menu.
ADJUST
returns to operational mode.
Highlight Configuration by pushing the control disk forward or backward and press
ENTER
to select. The configuration menu will be displayed.
ENTER
displays the Configuration menu.
EXIT
returns to the path selection menu.
ADJUST
returns to operational mode.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
¨CONFIGURATION
FRONT/TABLE
FRONT/CEILING
REAR/TABLE
REAR/CEILING
INSTALLATION
CONFIGURATION
OSD COLOR
INTERNAL PATTERNS
INSTALLATION
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
Select with
ê
or
é
then <ENTER>
<EXIT> to return.
The RETRO BLOCK GRAPHICS 2100LC can be installed to project images in four different
configurations: front/table, front/ceiling, rear/table and rear/ceiling. It is however mostly
used in a retro-configuration (rear/...).
