Barco R9861580US Installation Manual Download Page 70

Page: 70 / 124

R5900049 /13

ClickShare CSE-800

Image 6

–

12 Change image

Browse for the desired image, click Open to load the image.

The content of the file is checked and when valid (format and size), the file is uploaded. The new wallpaper
gets a red border.

Click on

Save changes

to apply the personalized wallpaper and replace the previous file.

The message

Successfully applied changes

is displayed on top of the page.

Remove personalized wallpaper

Hoover your mouse over the current image and click on the trash bin to remove the image.

Image 6

–

13 Remove wallpaper

The personalized wallpaper is removed and the default wall paper is activated.

6.7 Manage configuration files

About Manage configuration files

A full backup can be downloaded but cannot be used to duplicate configuration settings to other Base Units.
Therefore, it is possible to download a Portable version. This portable version can be uploaded via the upload

CSE-800 Configurator

Summary of Contents for R9861580US





























































































































Search results

Summary of Contents for R9861580US

Reviews:

Related manuals for R9861580US

Brands by name

Popular brands

Barco R9861580US, Installation Manual

Search results

Summary of Contents for R9861580US

Reviews:

Related manuals for R9861580US

Brands by name

Popular brands