Barco R9861580US, Installation Manual

Page: 107 / 124

107 R5900049 /13 ClickShare CSE-800
• Standby timer is reset to 10 min.
• Hostname and SSID is set to clickshare-serialnumber .
• The SSID is broadcasted
• Wi-Fi password is reset to clickshare .
• The default Wi-Fi channel is set back to frequency 5 GHz, channel 36.
• The update history is cleared.
• The table with the associated Buttons is cleared.
• The admin password is reset to admin .
• Debug logging and remote logging are disabled.
Restoring to factory defaults will require a repairing of the Buttons used with this Base Unit and the
setup flow has to be redone.
How to restore factory defaults
1. Log in to the Configurator .
2. Click Support & Updates → Troubleshoot .
Image 6 – 58 Troubleshoot, factory defaults
3. Click Reset to factory defaults .
The following message is displayed: “ This action will remove all settings of the Base Unit and replace them
with the default settings. Are you sure you want to continue? ”
4. If you want to continue, click Yes, remove all settings otherwise click No, I changed my mind .
When yes is clicked, the system starts a reboot.
Alternative way: The Base Unit can be reset to factory defaults by plugging in the power cable while
pressing the reset button.
CSE-800 Configurator