11-1
Optional Equipment
5975948 RETRODATA 2100 210198
11
3URMHFWLRQ5RRP
&RQWURO5RRP
Communication cable
Retro Projector
,55HPRWH
5HFLHYHU
OPTIONAL EQUIPMENT
IR Remote Receiver 800.
This infra red receiver unit makes it possible to control the Retro
Projector from another room.
There is a communication line with cable between the IR receiver and
the projector or the RCVDS. The control information from the RCU
can now be sent to this IR receiver.
The IR receiver 800 displays the selected source on a 7-segment
display.
Order number : R9827515
Hardwired RCU.
The control signals from the RCU can be sent to the projector via a
wired connection. (How to use the hardwired RCU, see chapter
Controlling)
Preparing your remote cable :
Use a shielded cable with a maximum length of 100 m and two mini-
jack 3.5 mm connectors (order number : R3131991).
shield = ground
conductor = data information
When the cable is ready, plug one side in the remote control and the
other side in the connector on the rear of the projector labelled ‘hard
wire remote’.
IR remote receiver 800
Hardwired RCU
RCVDS05
VS05
LCD Projector Control Software for Windows
Adapter and communication cables
VS05 Switcher
The VS05 is a versatile Video and HDTV source selector for all
BARCO's digitally controlled large screen projectors. It offers the
possibility to connect and switching up to 5 different Video sources,
3 different S-Video sources and 1 RGB Analog source to a BARCO
projector. In addition, the audio signal proper to the source, can be
switched to an audio amplifier.
Order number : R9827890 : 110v
Order number : R9827899 : 220v
RCVDS 05
An optional RCVDS 05 source selector makes it possible to connect
up to 20 sources to the projector. When RCVDS 05 is linked via the
expansion module, even 90 inputs can be connected to the projector.
The selected source number will be displayed on a 2 digit display and
the selected input module will be indicated with a LED on the rear.
Order number :
R9828880 (230V) without input modules
RCVDS 05
R9828888 (120V) with input modules
R9828889 (120V) without input modules
shield
conductor
H
ARDWIRE
CABLE
