2-4
Location and Function of Control
5975948 RETRO DATA 2100 121297
+
+
+
+
+
0
9
7
8
6
5
4
3
2
1
+
BALANCE
+
+
VOLUME
+
BASS
+
CONTRAST
TREBLE
BRIGHTNESS
COLOR
TINT
SHARPNESS
ADJ
FREEZE
MUTE
PHASE
EXIT
PAUSE
TEXT
STBY
ENTER
B
B
B
B
B
B
B
B
B
B
ADDR
HELP
RCU HOUSING
01
Back light key
: When activated, all keys will be lit up and visible
in the dark (not active in newer versions of RCU.)
02
ADJ.
: Adjust key, to enter or exit the adjustment mode.
03
Address key
(recessed key), to enter the address of the
projector (between 0 and 9). Press the address key, followed by
pressing one digit button between 0 and 9.
04
STBY
: Stand by button :
- To initiate remote power up operation
- To stop projection without main power off.
05
Pause
: To blank the image, press PAUSE. The image disappears
but full power is retained for immediate restarting.
06
Mute :
Press this key to temporarily turn off the sound. To return
to its previous level, press the key once again.
07
Help :
Not Active.
08
Digit buttons
: Direct input selection.
09
Sound controls
: Use these buttons to obtain the desired sound
level.
10
Picture controls
: Use these buttons to obtain the desired level
(see also 'Controlling') for each picture function.
11
Phase :
Used to remove instability of the image.
12
TEXT
: When adjusting one of the image controls during a
meeting, the displayed bar scale can be removed by pressing 'TEXT'
key first. To re-display the bar scale on the screen, press 'TEXT'
key again. 'TEXT' key is only active in operational mode. When 'TEXT'
is off, no warning message will be displayed.
13
FREEZ :
To freeze the projected image, the picture will freeze
but the sound will continue.
14
ENTER
: To start up the adjustment mode or to confirm an
adjustment or selection in the adjustment mode.
15
EXIT
: To leave the adjustment mode or to scroll upwards when
in the adjustment mode.
16
Control disc
: To make menu selections when in the adjustment
mode. Also allows to increment or decrement an adjustment in the
adjustment mode.
Control disc up = up arrow in the menus
Control disc down = down arrow in the menus
Control disc to the right = arrow to the right on the menus
Control disc to the left = arrow to the left on the menus
17
RC operating indication
: Lights up when a button on the
remote control is pressed. (This is a visual indicator to check the
operation of the remote control)
RCU control panel access and housing
Slide out the RCU by pulling it carefully forward.
This remote control includes a battery powered infrared (IR)
transmitter that allows the user to control the projector remotely.
This remote control is used for source selection, control, adaptation
and setup. It includes automatic storing of :
- Picture controls (Brightness, Sharpness,....)
- Sound controls
Other functions of the remote control are:
- Switching between stand-by and operational modes
- Switching to "pause" (blanked picture, full power for immediate
restarting)
- Direct access to all connected sources
- Variable adjustment speed : when pushing continuously on
the control disc or the picture keys, the adjustment will be
executed in an accelerated fashion.
RCU Control Panel Description & Function
RCU panel description & function, key diagram :
