Barco R9001250, Owner'S Manual

Page: 50 / 52

C-1
Source Numbers 90 - 99
5975128 BARCODATA 8200 030798
C
SOURCE NUMBERS 80 - 89 AND 90 - 99
Projector without any 800 peripheral connected.
The source numbers 80 - 89 and 90 - 99 do not correspond to physical inputs. An additional adjustment file can
be created for these source numbers. This file can contain different settings. The relationship between sources
0 - 9 and 90 - 99 or between 0 - 9 and 80 - 89 is shown in the diagram below.
source input 1
source number 1
source number 81
source number 91
file A
file A'
file A''
source input 2
source number 2
source number 82
source number 92
file B
file B'
file B''
source input 3
source number 3
source number 83
source number 93
file C
file C'
file C''
source input 4
source number 4
source number 84
source number 94
file I
file I'
file I''
Follow the steps below to create a second or a third file for sources 0 to 4 :
1. Select the source between 0 and 4.
2. Select the corresponding source number between 81 and 84 and between 91 and 94 with the digit keys on the
RCU.
3. Enter the adjustment mode and load a corresponding file. Edit this file if necessary.
4. Save the file and exit the adjustment mode.
Projector with a 800 peripheral connected.
Source numbers 90 - 99.
The source numbers 90 - 99 do not correspond to physical inputs. An additional adjustment file can be created for
these source numbers (source numbers of the 800 peripheral). This file can contain different settings. The
relationship between sources 0 - 9 of the 800 peripheral and 90 - 99 is shown in the diagram below.
source input 1
source number 1
source number 91
file A
file A'
source input 2
source number 2
source number 92
file B
file B'
source input 3
source number 3
source number 93
file C
file C'
source input 9
source number 9
source number 99
file I
file I'
○○
Follow the same procedure as for a projector without a 800 peripheral connected.