
Connections
5-7
5975128 BARCODATA 8200 221297
Straps on module level :
Floating or non-floating input.
Red : J3 : strap "yes" : non floating
strap "no" : floating
Green : J4 : strap "yes" : non floating
strap "no" : floating
Blue : J5 : strap "yes" : non floating
strap "no" : floating
H/C :
J6 : strap "yes" : non floating
strap "no" : floating
V : J7 : strap "yes" : non floating
strap "no" : floating
Factory preset : strap "yes", non floating input
Sync selection.
J8 : separate sync or sync on green.
Factory preset : separate sync.
)ORDWLQJRUQRQIORDWLQJLQSXW
Floating
Non-Floating
-6\QFVHOHFWLRQ
6HSDUDWHV\QF
6\QFRQJUHHQ
-
-
-
-
-
Connecting a computer, e.g. IBM PC (or
compatible), Apple Macintosh to the RS 232 input
of the projector.
The projector has a RS232 port that allows it to communicate with a
computer.
Applications : remote control and DATA communications.
a) remote control :
- easy adjustment of projector via IBM PC (or compatible) or MAC
connection.
- allow storage of multiple projector configurations and
set ups.
- wide range of control possibilities.
- address range from 0 to 255.
b) DATA communications :
- sending DATA to the projector or copying the VISION from
the projector to a hard memory device.
Set up of the baud rate for communication with a
computer.
The communication speed between projector and computer, e.g. PC
or MAC, has 8 possible speeds. With DIP switches S2(1,2,3) on the
controller unit, it is possible to select the baud rate (communication
speed).
Gaining access to the DIP switches
Power down the projector and unplug the power cord from the wall
outlet.
Turn both lock screws with a screwdriver or coin counter clock-
wise.
Lift up and pivot the top cover. Attention : the cover is not secured
with an incorporated support. When opening, turn it over slowly
and lay it down on the second part of the top cover.
The processor module with the DIP switches is located on top, the
front left side (seen from the front of the projector, see next page).
56
FRQQHFWLRQ
R
G
B
V
R
G
B
H / C
V
On
98
279
1
0
R
G
B
H / C
V
H
9,'(2,1387
9,'(2
69,'(2
RS 232 IN
REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY
COMMUNICATION PORT
(800-PERIPHERALS)
RS232 OUT
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE
IR-RECEIVER
Summary of Contents for R9001250
Page 1: ...OWNER S MANUAL R9001250 DATA 8200...
Page 2: ...BARCO PROJECTION SYSTEMS Date 030798 OWNER S MANUAL Rev 03 Art No R5975128 R9001250 DATA 8200...
Page 13: ...Installation Set Up 4 2 5975128 BARCODATA 8200 221297...
Page 25: ...7 2 Start up of the Adjustment Mode 5975128 BARCODATA 8200 221297...