Barco R9001250, Owner'S Manual

Page: 16 / 52

Connections
5-3 5975128 BARCODATA 8200 221297
S-VIDEO
98 27900
VIDEO
L R
AUDIO
9,'(269,'(2,1387
On On
Video input
Audio input not
available S-Video input
) OR D WLQ J R UQ R Q IOR D WLQ J LQ S X W
Floating
Non-Floating
-
-
-
T V tu n e r, e .g .
T V D M 4 0 ste re o
V C R
A u d io a m p lifie r
C o m posite
V ide o
VCR S-VHS
Luma/Chroma
R G B V R
G
B
H / C
V
On
98 279
10
R G B
H / C
V H
9,'(2,1387
9,'(2 69,'(2
RS 232 IN
REMOTE
PROJECTOR MODE :
GREEN - OPERATION
RED - STANDBY COMMUNICATION PORT
(800-PERIPHERALS)
RS232 OUT
IR-ACKNOWLEDGED
IR-RECEIVED
DIAGNOSTICS
CODE IR-RECEIVER
Select with or
then <ENTER>
<EXIT> to return.
Select with or
then <ENTER>
<EXIT> to return.
INPUT SLOTS
INSTALLATION
INPUT SLOTS
CONVERGENCE
CONFIGURATION
OSD COLOR
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with or
<ENTER> to toggle
<EXIT> to return.
Slot Module type [Config]
1. RGB-SS [CV]
2. RGB-SOG
3. Video [Video]
4. Component Video
Video/S-video input module
To the Video input :
Composite video signals from a VCR, OFF air signal decoder, etc...
1 x BNC 1.0Vpp ± 3 dB
To the S-Video input :
Separate Y-luma/C-chroma signals for higher quality playback of
Super VHS-signals.
1 x 4 pins plug (mini DIN)
pin configuration :
1 ground luminance
2 ground chrominance
3 luminance 1.0 Vpp ± 3 dB
4 chrominance 282 mVpp ± 3 dB
Input selection :
Key in the corresponding slot number on the RCU or the local
keypad. Depending on the priority setting in the Input slots
menu, Video or S-Video will be displayed. If the wrong source
type is displayed, start up the adjustment mode by pressing
ADJUST or ENTER .
Push the control disc key forward or backward to highlight System
settings and press ENTER to display the 'System Settings menu'.
EXIT returns to operational mode.
Use the control disc to select 'Input Slots' by pushing it forward or
backward and press ENTER . The internal system will scan the inputs
and displays the result in the 'Input Slots menu'.
Push the control disc forward or backward to select the correspond-
ing (video or S-video) input slot number.
To change the priority between Video and S-Video, press ENTER key
to toggle.
Straps on module level.
Floating or non-floating input.
Video input :
J11 : strap "yes" : non floating strap "no" : floating
S-Video input :
J12 : strap "yes" : non floating strap "no" : floating
J13 : strap "yes" : non floating strap "no" : floating
Factory preset : strap on, input non floating.