Barco R9001250, Owner'S Manual

Page: 33 / 52

8-8
Random Access Adjustment Mode
5975128 BARCODATA 8200 030798
Select with or
then <ENTER>
<EXIT> to return.
3
GAMMA = 2.2
Geometry
Highlight Geometry by pushing the control disc up or down and press
ENTER to select the geometry selection menu.
The following adjustment are possible :
• horizontal and vertical image shift.
• horizontal and vertical image size
• side keystone (only necessary if the projector is mounted at
a non standard projection angle).
• blanking
• options
The following ways are possible to adjust a geometry function :
• using the control disc to adjust or
• entering the value with the digit keys. Therefore, press ENTER to
select the indicated value and enter the desired value with the digit
keys. Press ENTER to confirm the entered value.
RANDOM ACCESS
ADJUSTMENT MODE
FILE SERVICE
PICTURE TUNING
GEOMETRY
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
SCALE
[
1:x
]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Shift
Highlight Shift by pushing the control disc up or down and press
ENTER .
The image can be shifted in a horizontal or vertical direction. Push
the control disc up or down to shift the image in a vertical direction.
Push the control disc to the right or to the left to shift the image in a
horizontal direction. The default value for the shift is 0.
Shifting in a vertical direction : when the shift value is positive, the
image is shifted upwards, when the value is negative, the image is
shifted downwards.
Shifting in a horizontal direction : when the shift value is positive, the
image is shifted to the right, when the value is negative, the image is
shifted to the left.
Size
Highlight Size by pushing the control disc up or down and press
ENTER to select.
The size can be adjusted in a vertical or horizontal way.
When adjusting the vertical size,
The upper side of the image is fixed (table and ceiling mounted
configurations) and only the lower side can be moved to its exact
position.
When adjusting the horizontal size, the left side of the image is fixed
and only the right side can be moved to its exact position.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
SCALE
[
1:x
]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
SCALE
[
1:x
]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
Example for table mount configuration
Horizontal size
adjustment
Vertical size
adjustment
Fixed sides
Gamma
With the gamma correction adjustment, it is possible to choose
between higher color saturation (lower image values) and softer
colors (higher gamma values).
To change the gamma value, highlight Gamma by pushing the control
disc up or down and press ENTER.
PICTURE TUNING
SYNC [SLOW]
STILL VIDEO [ON]
COLOR BALANCE
GAMMA