Barco R9001250, Owner'S Manual

Page: 35 / 52

8-10
Random Access Adjustment Mode
5975128 BARCODATA 8200 030798
Adjustment of the blanking on the top of the image
Adjustment of the blanking on the bottom of the image
Correct by pushing the control disc up or down
Adjustment of the blanking on the left side
Adjustment of the blanking on the right side
Correct by pushing the control disc to the right or to the left
Options
Highlight Options by pushing the control disc up or down and press
ENTER. The Geometry Options menu will be displayed.
The next question will be asked by the projector :
'Use the same side keystone correction for all files ? [YES] or [NO].
[YES] : the same keystone correction will be used for all installed files.
[NO] : the keystone has to be adjusted file per file.
Push the ENTER key to toggle between [YES] or [NO].
Press EXIT to return to the Geometry menu.
GEOMETRY OPTIONS
Use the same side
keystone correction
for all files ?
[YES]
<ENTER> to toggle
<EXIT> to return
BLANKING
TOP
BOTTOM
LEFT
RIGHT
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
SCALE
[
1:x
]
OPTIONS
Select with or
then <ENTER>
<EXIT> to return.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
SCALE
[
1:x
]
OPTIONS
Scale [1:1]
When 'scale 1:1' is selected, the real input signal without image
conversion is displayed on the screen. Parts of the image cannot be
displayed and will be lost.
Press ENTER to toggle between [1:1] and [1:x]. When toggled to [1:x]
the full image will be displayed.