24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
34
6.
Route the USB input cable (90409627EF from USB78 on the motherboard) to the left-side USB interface
board and zip-tie it to the touchscreen assembly frame. (See #4 in Image 2-39.)
The rear of the left-side touchscreen assembly is shown in Image 2-40; this screen is on the left side, when
viewed from the front.
Image 2-40: Touchscreen assembly
—
left-side connections
1
DVI cable from the HDMI Input (
“
Screen Input
”
) on the rear I/O plate
2
DisplayPort (from motherboard) to left-side display
3
USB input (from USB78 on motherboard) to left side
7.
Connect the DVI to HDMI pigtail adapter to the HDMI cable from the HDMI Input (
“
Screen Input
”
) on the rear I/
O plate.
HDMI Input is the bottom HDMI cable from the rear I/O plate.
Place a tie-wrap mount on the floor of the chassis near the connection point of the HDMI input cable to the left-
side touchscreen assembly and tie wrap the cable to the mount.
Note:
You may need to raise or remove the keyboard assembly to route these cables.
8.
Attach the DVI to HDMI pigtail adapter from the HDMI Input (
“
Screen Input
”
) on the rear I/O plate to the DVI
cable connection on the left-side touchscreen assembly.
Image 2-41: Touchscreen assembly
—
left-side cable ties
1
Power to the left side, zip-tied to the left-side breakout-board standoff
2
USB input (from USB78 on motherboard) to left side, zip-tied to the hole in the display frame near the point
where it connects to the USB interface board
3
Power and USB input to the right side
Note:
It is important to tie wrap these cables as shown so that they do not come into contact with the
fan blade when the display assembly is put back into it's normal position.
9.
Attach the USB input cable from the USB78 header on the motherboard to the left-side USB interface board.
10.
Zip tie the USB interface-board input cable to the hole in the touchscreen assembly frame. (See #2 in
Image 2-41.)
