![background image](http://html.mh-extra.com/html/barco/r767302k/r767302k_instructions-manual_474433026.webp)
24-1701050-00 /01
EC-200 to EC-210 Conversion Kit
26
Image 2-25: RTV silicone on USB connectors
1
RTV silicone
2
USB78 connector
3
USB910 connector
6.
Connect Cable 90409634EF to the cable labeled 90409631EF. This is the Power button assembly, P/N
90409637EF.
7.
Connect the power-button LED cable (5-pin connector on 90409634EF) to JFP2.
Make the connection so that the red wire is connected to pin 1.
Tie-wrap the power-button cable to the bottom holes of the rear unit fan.
Note:
It is important
that you apply some silicone sealant or RTV silicone to connectors JFP1 and
JFP2 (see Image 2-26), to prevent these connectors from coming loose during handling or transit.
Image 2-26: JFP1 and JFP2 connectors with RTV silicone
1
JFP1 connector
2
JFP2 connector
3
RTV silicone
Note:
For Step 7 refer to Image 2-27.
Image 2-27: JFP2 pinout
1
Pin 1: LED power
2
Pin 2: NC
3
Pin 3: GND
4
Pin 4: Keyboard lock
5
Pin 5: GND