Barco PHWU-81B, User And Installation Manual

Page: 88 / 143

8. Lamp relay
→ Maximum interval
24H
24H (24 hours)
1 WEEK
7D 00H (7 days and 00 hours)
← key Shifting the position of enter cursor to the left for each character.
→ key Shifting the position of enter cursor to the right for each character.
DEL key Deleting the character in the position of enter cursor for each character.
CLEAR key Deleting all the entered characters.
→ When the value you entered meets the following conditions, an error dialog box is displayed at the screen center.
- The value has been cleared by DEL or CLEAR and left blank.
- The value you entered is out of the setting range.
24H
25H or over
1 WEEK
7D 01H or over
- The value of each item is out of the setting range.
D
8 or over (1 WEEK only)
H 25 or over
10.When selecting OK , the setting is completed as the lamp-switching interval stored. However, when selecting CANCEL , the setting
is completed without storing.
→ The display returns the LAMP RELAY menu after selecting OK or CANCEL .
→ The setting you made is applied to NEXT LAMP RELAY in the INFORMATION menu.
Important
• When you use the projector continuously, the lamp relay may not be performed on time due to errors of the clock function.
• Immediately after the power-on, during the lamp selection, or during the lamp relay operation, you cannot change the setting
of LAMP SELECT and LAMP RELAY.
• In the case of continuous projection, the lamps may deteriorate earlier unless they are turned off for 1 hour per week.
• When using this projector continuously for a long time of period, enable LAMP RELAY.
• The brightness and color tint vary at the time of lamp switching.
84 R5905597 PHXX SERIES 20/05/2014