Barco PHWU-81B, User And Installation Manual

Page: 86 / 143

8. Lamp relay
→ When you select 1H/24H or 2H/1W , the box to set the lamp relay interval is displayed.
→ When the projector is turned off, the setting is cleared and the projector resumes operation from the time of the power-on or
menu setting shown in the preceding step.
1H/24H
2 3 H
0
OK
CLEAR
DEL
CANCEL
1 2 3 4 5 6 7 8 9
← →
NEXT LAMP RELAY
Image 8-6
2H/1W
0
OK
CLEAR
DEL
CANCEL
1 2 3 4 5 6 7 8 9
← →
6 D 2 2 H
NEXT LAMP RELAY
Image 8-7
9. Move the key cursor using the direction keys to select the number you want to enter and then press the ENTER key.
→ Maximum interval
1H/24H
23H (23 hours)
2H/1W
6D 22H (6 days and 22 hours)
← key Shifting the position of enter cursor to the left for each character.
→ key Shifting the position of enter cursor to the right for each character.
DEL key Deleting the character in the position of enter cursor for each character.
CLEAR key Deleting all the entered characters.
→ When the value you entered meets the following conditions, an error dialog box is displayed at the screen center.
- The value has been cleared by DEL or CLEAR and left blank.
- The value you entered is out of the setting range.
1H/24H
24H or over
2H/1W
6D 23H or over
→ The value of each item is out of the setting range.
D
7 or over (2H/1W only)
H 24 or over
10.When selecting OK , the setting is completed as the lamp-switching interval stored. However, when selecting CANCEL , the setting
is completed without storing.
→ The display returns the LAMP RELAY menu after selecting OK or CANCEL .
→ The setting you made is applied to NEXT LAMP RELAY in the INFORMATION menu.
Important
• When you use the projector continuously, the lamp relay may not be performed on time due to errors of the clock function.
• Immediately after the power-on, during the lamp selection, or during the lamp relay operation, you cannot change the setting
of LAMP SELECT and LAMP RELAY.
• In the case of continuous projection, the lamps may deteriorate earlier unless they are turned off for 1 hour per week.
• When using this projector continuously for a long time of period, enable LAMP RELAY.
• The brightness and color tint vary at the time of lamp switching.
82 R5905597 PHXX SERIES 20/05/2014