Barco PHWU-81B, User And Installation Manual

Page: 55 / 143

5. Advanced menu
Item
Setting
Function
4:3 Regardless of the type of input signal, image is displayed at 4:3
aspect ratio.
USER
Displays the detailed settings.
USER
ENTER
The USER menu is displayed for the following adjustments.
CLAMP POSITION
1-255 Use to correct solid white or solid black in the projected image.
CLAMP WIDTH 1-63 Use to correct solid black in the projected image.
VERT. SYNC. AUTO / OFF Use to adjust the image when its motion doesn’t run smoothly. Select
AUTO for normal use.
LPF ON / OFF Use to select whether or not to enable the LPF.
SHUTTER(U) 0-259 (for PHWU-81B) /
0-142 (for PHWX-81B) /
0-126 (for PHXG-91B Use to adjust the image when noise appears on the top part of the
image.
SHUTTER(L) 0-259 (for PHWU-81B) /
0-142 (for PHWX-81B) /
0-126 (for PHXG-91B) Use to adjust the image when noise appears on the bottom part of
the image.
SHUTTER(LS) 0-311 (for PHWU-81B) /
0-192 (for PHWX-81B) /
0-128 (for PHXG-91B) Use to adjust the image when noise appears on the left half of the
image.
SHUTTER(RS) 0-311 (for PHWU-81B) /
0-192 (for PHWX-81B) /
0-128 (for PHXG-91B) Use to adjust the image when noise appears on the right half of the
image.
• Though horizontal strips may appear on the enlarged projected image, such symptom is not a malfunction.
• When you change the horizontal or vertical position to a large extent, noise may appear
• The adjustable range of the vertical position varies depending on the type of the input signal. Though the image may stay in
the same position even when the setting value is changed, such symptom is not a malfunction.
• When you increase the setting value of OVER SCAN, noise may appear on the screen.
• When 16:9 is selected by SCREEN, you cannot set ASPECT to 16:9.
• When 4:3 is selected by SCREEN, you cannot set ASPECT to 4:3.
• ASPECT-USER setting supports the COMPUTER1, COMPUTER2, DVI, and HDMI terminals only. Therefore, you cannot se-
lect USER for other terminals.
You can set the IMAGE menu and the SIGNAL menu only when the signal is supplied.
5.9 NETWORK menu
Overview
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE SIGNAL
NETWORK INFO
IP CONFIG
DHCP
IP ADDRESS
SUBNET MASK
DEFAULT GATEWAY
0. 0. 0. 0
MAC ADDRESS
SAVE SETTINGS
ON
0. 0. 0. 0
OK
0. 0. 0. 0
IMAGE INSTALL1 INSTALL2
MULTI-
SCREEN FEATURE SIGNAL
NETWORK INFO
CONTROL SYSTEM
NETWORK
PASSWORD
NETWORK
CERTIFICATION
PROJECTOR NAME
IP CONFIG
NETWORK RESET
STANDARD
ENTER
ENTER
OK
OFF
NETWORK RESTART
OK
Image 5-19
Item Setting Function
PROJECTOR NAME
*****...
Set the name to identify the projector. Enter up to 15 characters
(alphabets or numeric characters).
R5905597 PHXX SERIES 20/05/2014 51