Barco PHWU-81B, User And Installation Manual

Page: 36 / 143

4. Getting started
main menu is on screen, go to button required
result
RCU Lite → OSD Lite
Action → on screen
adjust keystone
and/or
and/or
>
select language
>
go to lamp mode desired (default setting =
NORMAL
>
show lamp info
>
show lamp mode
>
and/or go to lamp mode desired (default setting
= NORMAL
>
show projector info
>
enter advanced menu
>
contact your service technician to enter the advanced menu
default password : ◄ ◄ ► ▼
>
4.3 Projecting images
Preparation
Remove the lens cap before starting projecting images.
1
3
, , ,
2
4
Image 4-4
1
Status LED
2 ON/OFF key
3 OK key
4 HOME key
How to project
1. Con fi rm the STATUS Led lights up red.
If the projector was turned off before the lamp was cooled down suf fi ciently last time, the fan may start rotating and the ON/OFF
key may not work after the power cord is plugged. After the fan stops rotating, press the ON/ OFF key to turn back on the STATUS
Led.
2. Turn on the power of the connected equipment.
3. Press the ON/OFF key.
32 R5905597 PHXX SERIES 20/05/2014