Barco Nio systems, Installation & User Manual

Page: 39 / 128

Display installation
Nio systems 39
2.
Connect the output of the 12V DC power supply to the DC input of
the display.
3.
Connect one end of the proper power cable to the AC input of the
12V DC power supply.
4.
Connect the other end of the power cord to a
grounded
power
outlet.
Video connection
Connecting DVI cables:
One display:
Figure 15
1.
Connect one end of the DVI cable to the DVI input of the display.
2.
Connect the other end of the DVI cable to the DVI connector of the
display controller board. If this board has 2 video heads (2 video
outputs), connect to output Vid 1 (Head A).
Connecting DVI cables:
Two displays:
1.
Connect the left display (when looking at the front side) to display
controller output Vid 1 (Head A) as described above.
2.
Connect the second display to output Vid 2 (Head B).
(1)