Barco Nio systems, Installation & User Manual

Page: 69 / 128

NioWatch operation
Nio systems 69
When you start up the system, the calibration is also reset to the
latest calibrated position. The luminance, however, is kept at the
latest value.
To view a graph showing the result of the latest calibration:
1.
In the Calibration tab dialog, click on
Show calibration chart
.
This button is available only if the display has been calibrated with
a sensor before.
2.
A graph is shown displaying the latest calibration compared to the
theoretical display function.
To revert to the default factory settings:
1.
In the Calibration tab dialog, click on
Reset
.
2.
As a result, the settings are restored to the default factory values.
Test patterns
Test Patterns
Figure 31: Test Patterns dialog
1.
Select the desired test pattern by clicking on the corresponding
thumbnail or selecting a pattern by name from the Test pattern
drop-down box.
2.
Click
Show
to display the pattern.
If you have selected
Custom Image
, you can select a bitmap
image (e.g., saved on the hard disk) as test pattern.