Barco Nio systems, Installation & User Manual

Page: 41 / 128

Display installation
Nio systems 41
• Bind the cables together above and under the foot, by means of
the 2 velcro strips attached to the inside of the foot cover
(packed inside the accessory box).
• At last, put the foot cover back in place.
To put the foot cover in place:
Figure 17:
1.
The foot cover is packaged separately in the accessory box. Unpack
the foot cover.
2.
Push the upper side of the cover onto the foot, so that the hooks
inside the cover are positioned right under the bulges at the rear
of the foot.
3.
Slide the cover upward while moving the lower side of the cover
towards the foot.
4.
Press the cover to the foot so that it makes a clicking sound.
(2)