Barco Matrix-PRO HD-SDI, Installation And Operator'S Manual

Page: 51 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
45
Audio Routing
Gain.....................................................
-76dB to +20dB
Frequency response ........................... 20 Hz to 20 kHz, @2V
p-p
with 0.03% THD+N
Noise ................................................... 0.03% @ 1 kHz at rated maximum
output drive
S/N ...................................................... >75dB, balanced, at 2V
rms
Crosstalk / Stereo Separation.............. <-85dB @ 1 kHz, fully loaded
Audio Input AUDIO MODELS ONLY
Number/signal type ..............................16 stereo, balanced/unbalanced
Connectors ......................................….16 3.5 mm captive screw connectors, 5
pole
Impedance............................................10 kohm balanced or unbalanced, DC
coupled
Maximum level......................................6V
rms
at 0.3% THD+N
Audio Output
Number/signal type ......................….....16 or 8 stereo, balanced/unbalanced
Connectors ...........................................16 or 8 3.5 mm captive screw connectors,
5 pole
Output gain adjustment.………..…..…..-76dB to +20dB, adjustable per input by RS-
232/485 or front panel
Impedance.............................................50 ohms unbalanced, 100 ohms balanced
Gain error ............................................. ±0.1dB channel to channel
Maximum level (Hi-Z) ........................... 2V
rms
at 0.03% THD+N, 6V
rms
at 0.3%
THD+N
Maximum level (Lo-Z) ........................... 1.7V
rms
at 0.03% THD+N, 6.2V
rms
at 0.3%
THD+N
Control/Remote
Serial control port ...............................RS-232/ RS-485, 25-pin female D connector
Baud rate and protocol ......................9600, 8-bit, 1 stop bit, no parity
Ethernet control port ......................... 1 RJ-45 female and connector
Ethernet data rate.............................. 10/100Base-T, half/full duplex with
autodetect
Ethernet protocol ...............................ARP, ICMP (ping), TCP/IP, Telnet, HTTP
POWER
Type…………………………………....100-240 VAC, 47-63 Hz, auto-configuring
Connector……………………………...IEC connector with integrated fuse and switch
Power Dissipation………………….....150 watts
Enclosure
Dimension ........................................ 16.25" H x 17.0" W x 13" D (9U high, full
rack width)
41.3 cm H x 43.2 cm W x 33.0 cm D
Weight................................................50 lbs (23 kg)
Shipping weight................................ .55 lbs (25 kg)
Rack mount .......................................Yes, with included parts
Enclosure type ..................................Metal