Barco Matrix-PRO HD-SDI, Installation And Operator'S Manual

Page: 50 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
44
8.0 MATRIXPRO
TM
16X TECHNICAL SPECIFICATIONS
Video
Routing
Gain.....................................................Unity into 75 ohm load
Bandwidth ...........................................375 MHz (-3dB) @ 0dBm, fully loaded
( One input driving all outputs)
0-25MHz +/- .1dB, 25-2dB -.5dB @ 0dBm
Crosstalk........…………………....…… -70dB @ 1 MHz, -55dB @ 10 MHz, -45dB @ 30
MHz, -35dB@ 100 MHz
Switching speed..................................100 us to 4 seconds (Programmable)
Video Input
Number/signal type .............................16 RGBHV, RGBS, RGsB, RsGsBs, analog
HDTV, component, composite,
S-video
Connectors ..........................................16 x 5 are female
Minimum/maximum levels....................Analog–0.5V to 1.85V p-p with no offset
Impedance........................................... 75 ohms
Return loss ........................................ -30dB @ 5 MHz
Maximum DC offset (Vin=1Vpp).....… +1.8V, -.6V
Video Output
Number/signal type ............................ 16 or 8 RGBHV, RGBS, RGsB, RsGsBs,
analog HDTV, component, composite,
S-video
Connectors.......................................... 16 or 8 x 5 BNC female
Maximum level.................................... 2.85V p-p with limited BW, 0dBm for
375MHz BW
Impedance........................................... 75 ohms
Return loss.......................................... -30dB @ 5 MHz
DC offset............................................. ±125mV maximum with input at 0V offset
Switching type...................................... RGB Delay up to 4 seconds
Sync
Input type............................................. RGBHV, RGBS, RGsB
Output type.......................................... RGBHV, RGBS, RGsB
Input level ............................................0.5V to 5.0V p-p, 2.5V p-p normal
Output level (min).................................2.0-V p-p into 75 ohm load, 4V p-p no load
Input impedance.....................………...75 ohms
Output impedance............................... 75 ohms
Polarity................................................. Positive or negative (follows input)
VREF Sync
Input type............................................. VSync
Output type.......................................... VSync, Channel 1 VSync, Channel 1 Green
VSync (Extracted)
Input level ............................................0.5V to 5.0V p-p, 2.5V p-p normal
Output level (min).................................2.0-V p-p into 75 ohm load, 4V p-p no load
Input impedance.....................………...75 ohms
Output impedance............................... 75 ohms
Polarity................................................. Positive or negative (follows input)
A
UDIO — AUDIO MODELS ONLY