Barco Matrix-PRO HD-SDI, Installation And Operator'S Manual

Page: 21 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
15
3.2.1.3 ROUTING
ROUTING MENU
_________________________________________
AUDIO FOLLOWS VIDEO
OUTPUT ( 1 )
INPUT MUTE
To select an output, rotate the dial press SEL. An input can then be routed by
rotating the dial and pressing SEL. The routing won’t take place until ESC is pressed.
This way multiple routes can be set up and will take effect all at once.
3.2.1.4 VOLUME
VOLUME MENU
_________________________________________
AUDIO FOLLOWS VIDEO
INPUT ( 1 )
VOLUME 0 DB
An input must be routed to an output for the volume to be adjusted. The
adjustments occur in real time.
3.2.1.5 FILES
FILES MENU
_________________________________________
SAVE CONFIG ( 1 )
RECALL CONFIG 1
Once a configuration, or “look”, has been setup in the routing menu, it can be saved
for later recall. Simply enter the files menu and with Save Config selected press
SEL. Then rotate the dial to pick a file number and press SEL. This file number will
now be available under Recall Config.
To recall a look rotate the dial so that Recall Config is selected and press SEL. Then
rotate the dial until the desired saved file is reached and press SEL. Only file
numbers that have looks saved to them will show up.