![background image](http://html.mh-extra.com/html/barco/matrix-pro-hd-sdi/matrix-pro-hd-sdi_installation-and-operators-manual_473468025.webp)
MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
19
3.3.2
E
QUIPMENT
S
ETUP
Connect the input and output sources on the MatrixPRO
TM
. Connect the MatrixPRO
TM
remote port to an available serial (RS-232) port on the laptop/PC with the MP Control
application installed. Turn on the MatrixPRO
TM
and wait for a complete system boot
up. After the MatrixPRO
TM
has successfully booted up, run the MP Control application.
3.3.3
R
EMOTE
E
THERNET
S
ETUP
To control the MatrixPRO
TM
using a computer on the same LAN, pre-configure the
MatrixPRO
TM
with a static IP address using RS-232 ipconfig command, program the
MatrixPRO
TM
using the GUI over RS-232, or use the front panel. On the remote
computer, launch the GUI. Press 'NO' when it asks if you would like to connect
serially. Press the Setup tab. Enter the IP address of the MatrixPRO
TM
in the IP
address box. Click the 'Ethernet' radio button under the 'RS-232'. The MatrixPRO
TM
now will be under the control of the GUI.
Summary of Contents for Matrix-PRO HD-SDI
