Barco Matrix-PRO HD-SDI, Installation And Operator'S Manual

Page: 13 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
7
kit provided by Barco Folsom or L-brackets that would be supplied by the rack
manufacturer.
When rack mounting the unit, remember that maximum ambient operating
temperature for the unit is 40° C. Leave at least one inch of space front and rear to
make sure that the airflow through the fan and vent holes is not restricted. When
installing equipment into a rack, distribute the units evenly to prevent hazardous
conditions that may be created by uneven weight distribution. Connect the unit only
to a properly rated supply circuit. Reliable Grounding (Earthing) of Rack-Mounted
Equipment should be maintained.
2.3 POWER CORD/LINE VOLTAGE SELECTION
The MatrixPRO
TM
16x Matrix Switcher performs line Voltage Selection automatically.
No user controls are required for line voltage selection. The AC power cords must be
accessible so that the cords can be removed during field servicing.
2.4 DUAL POWER SUPPLY VERSION
For dual power supply models, plug both power cord into the AC supply. Each power
supply is independent and can be plugged into different sources. If desired, only one
supply needs to be plugged in for proper operation.
When the MatrixPRO
TM
16x is used in the 230-volt mode, a UL listed line cord rated
for 50 volts at 15 amps must be used. This cord will be fitted with a tandem prong-type
plug.
Tandem Plug
La choix de la ligne de voltage se réalise automatiquement par le
MatrixPRO 16x Transformateur Graphique. On n'a pas besoin du
controller usager pour la choix de la ligne de voltage.
Das MatrixPRO 16x-Gerät mu beim Anschlu an 240V ~ mit einer vom VDE auf
250V/10A geprüften Netzleitung mit einem Schukostecker ausgestattet sein.
WARNING
AVERTISSEMENT
WARNUNG