Barco Matrix-PRO HD-SDI, Installation And Operator'S Manual

Page: 42 / 52

MatrixPRO
TM
16x Series
Manual #26-0301100-00/ Revision A
36
Command:
RESETMP op
Description: Resets the system to factory defaults
Parameters: op - Reset operation; [R|F], Restart|Factory
Example:
RESETMP F (Resets system to factory defaults and resets all user
saved presets.)
Command:
RTEMP out in audio
Description: Routes input to output. If the output is in a group, all the outputs in
the group will be routed to the
input specified. If the output is in a I/O group but the input is not in
the group, the command will be
ignored.
Parameters: out - Output number; [1 - 8]
in - Video Input number to route video; [1-12] / 101 if no input to
add / 0 unroutes input
audio - Audio Input number to route audio; [1-12] / 101 if no
audio to add / 0 unroutes input
Query:
RTEMP? out
Returns the current video and audio inputs routed to the specified output in
the format:
=in audio
Example: RTEMP 1 3 4 (Route to output 1, video input 3, audio input 4.)
RTEMP 4 101 5 (Route to output 4, audio input 5)
Command:
SBAUD mode
Description: Serial Baud Rate. Selects between 19.2, 28.8, 38.4, or 57.6K baud.
Parameters: mode - Mode; [0|1|2|3], 19200|28800|38400|57600
Query:
SBAUD?
Returns the current serial baud in the format.
=mode
Example: SMODE 0 (Sets Serial baud rate to 19200.)
Command:
SMODE mode [485id]
Description: Serial Mode. Selects between RS-232 or RS-485 serial modes. If select
RS-485 mode, also need to specify RS-485 ID.
Parameters: mode - Mode; [0|1], RS-232|RS-485
485id - RS-485 ID for the MatrixPRO
TM
. This field is ignored if
switching to RS-232 mode
Query:
SMODE?
Returns the current serial mode in the format.
=mode 485id