5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
5-21
Phase
Phase can be adjusted in the range from 0 to 255.
It is recommended to have the monitor warmed up for about 5 minutes before adjusting phase.
Use the
Phase
adjustment to eliminate shimmering horizontal streaking.
If there are not only horizontal streaking but also vertical banding, start with Clock
adjustment!
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Phase
•
Press
5
and
6
to navigate to
Phase
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action. Check the test pattern!
Clock
Clock can be adjusted in the range from 0 to 255.
It is recommended to have the monitor warmed up for about 5 minutes before adjusting clock.
Use the
Clock
adjustment to eliminate broad vertical banding.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Clock
•
Press
5
and
6
to navigate to
Clock
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 1
The current value is indicated.
•
Use
3
and
4
to increase/decrease the value in
steps of 1
The current value is indicated.
The value is applied without any further action. Check the test pattern!
