5. The On Screen Display (OSD)
Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
______________________________________________________________________________________
5-31
5.4.4
Time out
The value can be set between 0 and 60 seconds in steps of 5 seconds.
The OSD will close (disappear) automatically when no selections are made during a certain time. This period can
be set by means of the
Time out
parameter.
The OSD stays active as long as it is in use.
Independent from the Time out setting, you can close the OSD at any time by using the Exit
button the RCU or the push button 7 on the right rear side of the monitor.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
Time out
•
Press
5
and
6
to navigate to
Time out
•
Use the
left
and
right
cursor keys to in-
crease/decrease the value in steps of 5
The current value is indicated.
•
Use
3
and
4
to increase/decrease the value in
steps of 5
The current value is indicated.
The value is applied without any further action.
5.4.5
OSD Zoom
Zoom can be selected in or out.
This command will magnify the OSD window and the icons by approx. the factor of 2.
RCU
Push button (1: top most)
•
Use the
up
and
down
cursor keys to navigate to
the
OSD Zoom
•
Press
5
and
6
to navigate to
OSD Zoom
•
Use the
left
and
right
cursor keys to select one
of the options
In, Out
The current selection is visualized by a white
caption.
•
Use
3
and
4
to select one of the options
In, OUt
The current selection is visualized by a white cap-
tion.
•
Apply the selection with
Enter
.
•
Apply the selection with
2
This selection has to be confirmed to be applied.
