5. The On Screen Display (OSD)
5-42 __________________________________________________________Barco - LC series - R5976934 - user's manual - Revision 08 - April 2008
The following sources can be connected to the monitor:
Input
Interface
signals
Video system input
VIDEO IN
RCA
NTSC/PAL
S-VIDEO
S-Video Mini Din 4pin
NTSC/PAL
YUV (Y Pb/Cb Pr/Cr) Component Mini Din 8 pin NTSC/PAL
RGB input
RGB Analog
D-Sub 15 pin
RGB analog
RGB Digital
DVI-D 24 pin
RGB digital
HD-SDI input
Serial Digital
BNC
SDI / HDSDI
To select a signal, proceed as follows:
RCU
Icon
Push button (1: top most)
•
Press the
ADJ
key to activate the OSD
•
Press
7
to activate the OSD
•
Use the
left
and
right
cursor keys to navi-
gate to the
signal
menu
•
Press
3
and
4
to navigate to the
signal
menu
•
Press
Enter
to select
•
Press
2
to select
•
Use the
down
cursor keys to open the
input signal selection dialog
•
Press
4
to open the input signal
selection dialog
•
Use the
left and right
cursor keys to select
the desired signal
•
Press
3
and
4
to select the desired
signal
In case the signal is assigned to input 1, it cannot be assigned to input 2!
To change the signal of input 1 and input 2, input 1 has to be assigned to the signal which
up to then has been assigned to input 2.
In case of two valid signals, input 2 then will automatically be assigned to the signal which
up to then has been assigned to input 1.
In case of more signals, input 2 has to be explicitely assigned to a signal (all but the one
assigned to input 1).
To select HD-SDI input 1 or HD-SDI input 2, first select HD-SDI in the OSD. When it is
highlighted, press 1 to select the signal connected to HD-SDI input 1, or press 2 to select
the signal connected to HD-SDI input 2.
