4. Operating
Barco – Eos Workstation for Windows – DOC-3062-2 – Revision 12 – August-2004
__________________________________________________________________________
4-27
Preset editor
The
Preset Editor
allows the creation and adjustment of presets. Please, refer to section
. The preset editor looks slightly different for each type of RGB input card. The table below lists all available
elements on the different dialogs.
Figure 4-12
Preset Editor
Preset
Name
Enter a name for a new preset
Change
Click this button to enter the correct resolution if the resolution shown differs from the
resolution of your screen mode.
Timing
HPos
The horizontal position of the monitor signal in relation to the window is adjusted
VPos
The vertical position of the monitor signal in relation to the window is adjusted
PLL Divider
The value represents the actual number of pixels per line
Phase
Adjustment of the phase
Advanced
Set manually
Enables the automatic setting of the following parameters:
VCO Range
VCO Range
Charge Pump Current
Charge Pump Current
HV Level
Horizontal Vertical Sync Level
SoG Level
Sync on Green Level
